Highlights
- Optimal pH Balance
- Efficient Chemical Usage
- Easy Application
Description
Ensure the perfect pH balance in your pool or hot tub with PH Plus Granules, a must-have product that allows you to elevate the pH level to the optimal range of 7.2 - 7.6. Maintaining the right pH level is essential for enhancing bather comfort, maximizing the efficiency of chemical treatments, and safeguarding your pool equipment from corrosion.\n\nIf your pool water tests below 7.2 on the pH scale, PH Plus Granules come to the rescue, offering a convenient solution to raise the pH and restore the balance to the recommended levels.\n\nApplication of PH Plus Granules is a straightforward process that ensures effective results:\n\n1. Begin by pre-dissolving the granules in a clean plastic container, following a ratio of 100g of product per 10 litres of warm water. Thoroughly mix the solution to ensure complete dissolution before carefully adding it to the pool water with the pump(s) running. It is advisable to pour the solution near the water inlets for better distribution throughout the pool.\n\n2. Allow a minimum of 8 hours for the product to take effect, then retest the pH level. If needed, repeat the treatment until the desired pH range of 7.2 - 7.6 is achieved. Depending on the initial pH level, multiple treatments may be necessary to achieve the perfect balance.\n\nFor dosing convenience, refer to the recommended rates based on the water volume of your pool or hot tub:\n\n- For a hot tub containing 1,000 litres (220 Gallons) of water, add 10g of PH Plus Granules.\n\n- In a small pool with 40,000 litres (8,800 Gallons) of water, the recommended dosage is 450g.\n\n- For medium-sized pools holding 60,000 litres (13,200 Gallons) of water, add 650g of PH Plus Granules to adjust the pH levels effectively.\n\nDon't let imbalanced pH levels ruin your pool experience. Invest in PH Plus Granules today to ensure the water in your pool or hot tub remains perfectly pH-balanced, creating a comfortable and safe environment for swimmers while preserving the integrity of your pool equipment. With easy application and reliable results, PH Plus Granules are the ideal solution for maintaining your pool water at its best.\n\nManufacturers description:\n\nPH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.\n\nTest the pH of your pool water if it is below 7.2, use pH Plus to raise it.\n\nApplication Instructions:\n\n1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned 'on', preferably near to the water inlets to aid distribution.\n\n2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.\n\nDosing rates:\n\nHot tub: 1,000 litres (220 Gallons) of water ? add 10g\n\nSmall pool 40,000 litres (8800 Gallons) of water - add 450g\n\nMedium pool 60,000 litres (13200 Gallons) of water - add 650g
