Preparation and Usage
Mam easy to drink cupEnjoy spill-free drinking with the Mam Easy to Drink Cup. Our 360° valve is carefully designed to allow children to drink from any side, while remaining spill-free between sips. The Mam Easy to Drink cup supports babies and toddlers with the transition to open cup drinking. The included travel lid protects for transportation, making it perfect for kids on-the-go.4+ Months 150ml starter cup6+ Months 190ml learn to drink cup8+ Months 270ml fun to drink cup8+ Months 290ml easy to drink cup12+ Months 330ml sports cupBefore first use- Disassemble the product into all individual parts and clean before first use.- Then place the individual parts in boiling water for 5 minutes. If you are using a pot, ensure there is enough water in the pot. This is to ensure hygiene. You can find more information on cleaning in the relevant section.Cleaning- Disassemble the product into its individual parts and clean in warm soapy water before each use. Do not usecleaning products with harmful ingredients such as alcohol, chlorine and/or microplastics. Do not leave parts in acleaning solution (e.g. soapy water) for longer than recommended - this could impair the function of the product.- After cleaning, sterilisation can be done as follows: steam sterilisation (electric or microwave, according to the manufacturer's instructions), sterilisation in boiling water (10 minutes), or using a sterilising solution.- Cleaning when assembled can damage the drinking cup. For optimum cleaning, the drinking cup MUST be disassembled into all individual parts.- Suitable for cleaning in the top compartment of the dishwasher (at up to 65° C).- Clean the valve with care to avoid damage. Rinse the ventilation slots thoroughly so that no liquid residue collects there.- Do not use abrasive cleaning agents. Only use soft brushes or soft sponges. Hard cleaning brushes can scratch the material.- After each use, clean all individual parts and dry them separately.- Before each use, check all individual parts and slowly brush over the ventilation slots of the valve a few times with your thumb or fingers to re-open them. Throw it away immediately at the first sign of damage or defects.- Individual parts can be discolored by food. This has no negative effect on the material or the functionality of the cup.