Description
Johnstone’s Quick Dry Primer Undercoat is suitable for use on interior and exterior bare timber and masonry surfacesIt provides a contemporary, high sheen finish that is ideal for a quick and efficient paint job. Easy to apply to surfaces and use, dry to the touch in just 1-2 hours.It is a water based paint, with at non - yellowing, low odour formulation and is easy to apply for interior use with coverage of 8m2 per tinIt provides a classic, yet durable finish to interior wood and metal.Perfectly primes bare wood and previously painted wood and metal surfaces. Use with Johnstone's Quick Dry or Hardwearing Gloss or Satin
Water basedTouch dry in 1-2 hoursCoverage 8m2
Pack size: 750ML
Preparation and Usage
All surfaces should be clean, dry and free from grease. Remove any loose or flaking paint. Rub down sound glossy surfaces with fine waterproof abrasive paper and rinse thoroughly to provide a key. Avoid inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Ensure good ventilation during application and drying. Stir well before use and apply by brush or roller. Apply liberally and evenly for a smooth finish, avoid overspreading. Under normal conditions the paint is touch dry in 1-2 hours. Allow 3-4 hours before applying a second coat. Do not apply when air or surface temperature is below 10 degrees Celsius or in damp conditions. Replace lid firmly after use. Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly. To avoid risk of spillage always store and transport in a secure upright position. Do not empty waste paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. Protect from frost.
Lower age limit
16 Years
