Description
Tired of looking at that yellowed , mouldy, old sealant…but put off by the thought of replacing it? Re-new is the easiest way possible! Apply new, fresh, smooth sealant directly over old sealant. Minimal skills needed, done in minutes for use in your bathroom or kitchen.The new improved auto-smooth nozzle allows you to easily apply directly over old sealant for a perfect finish without the need for any other tools. It can help you quickly rejuvenate dirty, cracked sealant faster than before for a perfectly smooth and clean result.Clean the surfaces before applying. Treat mouldy sealant with bleach/mould cleaner then allow to dry thoroughly. Place the nozzle on sealant with UniBond logo facing you, tilt to ensure tight seal between the wall/bath, shower or sink. Lightly squeeze and push the bottle forward, keeping the nozzle at the same angle. Clean excess product with tissue during application. For a perfect finish, repeat step 3 without squeezing.
The UniBond brand covers a wide-range of product categories including construction adhesives, sealants, tiling and moisture absorbers. UniBond empowers and inspires creators and doers to take on their project with confidence and to complete with pride.The No More Nails construction adhesive range enters its 26th year, and in 2019 launched the No More Nails All Materials sub-range to widen the scope of bonding applications.UniBond Sealants has a wide range of products for kitchen & bathroom with superior Triple Protection anti-mould system as well as specific indoor and outdoor products. The UniBond ReNEW concept targets new-users with a super easy-to use applicator and formulation which goes on top of your existing sealant to create a new and professional-looking finish.In 2020, UniBond launched the UltraForce Tiling range to step-on the ready-mixed tile adhesive market and re-state UniBond as the DIYers champion.UniBond Aero 360 improves the air quality in your home. This refillable moisture absorber controls moisture levels to help prevent condensation, mould and musty smells. It not only protects your home and belongings, but also improves your well-being and that of your family.
2004/42/EC A (i) One-pack performance coatings, VOC max 140 g/l, VOC 35 g/l. Contains biocidal product: preservative thiabendazole.
Auto smooth nozzle - Refreshes old bathroom or kitchen by simply adding on top of old sealantNo other tools needed - Sealant features an innovative applicator, ensuring easy application & a professional finishMould resistant - Mould is an unwelcome guest in your home. Show it the door with this mould resistant sealant.
Net Contents
80ml ℮
Preparation and Usage
Average coverage 5 metres enough for standard bath and showerHow to apply1 Clean the surface before applying. Treat mouldy sealant with bleach/ mould cleaner. Allow to dry thoroughly.2 Place nozzle on sealant with UniBond logo facing you, tilt to ensure tight seal between the wall/bath, shower or sink.3 Lightly squeeze and push the bottle forward, keeping the nozzle at the same angle.4 Clean excess product with tissue during application.5 For a perfect finish, repeat step 3 without squeezing.After 6h min water contact24h Cleaning product contact5m Average coverage for 1mm coating layerEnough for standard bath and shower.Correctable: If result is unsatisfactory remove product immediately with paper tissue/water and re-apply.After use: clean the applicator with tissue and replace cap.Suitable for covering coloured silicones (coating thickness ≥ 1mm)
Use within one month after opening
Card. Recycle
UFI: 6TQ8-40JS-400E-12WKWarning. Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Avoid release to the environment. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container in accordance with national regulation.
Manufacturer Address
GB: Henkel Limited,Winsford,Cheshire,CW7 3QY.IRL: Henkel Ireland Distribution Ltd,Dublin,D24 YH42.
Return to
GB: 01606 593933IRL: 1800 804380technical.services@henkel.co.ukGB: Henkel Limited,Winsford,Cheshire,CW7 3QY.IRL: Henkel Ireland Distribution Ltd,Dublin,D24 YH42.
Using Product Information
While every care has been taken to ensure product information is correct, food products are constantly being reformulated, so ingredients, nutrition content, dietary and allergens may change. You should always read the product label and not rely solely on the information provided on the website.
If you have any queries, or you'd like advice on any Tesco brand products, please contact Tesco Customer Services, or the product manufacturer if not a Tesco brand product.
Although product information is regularly updated, Tesco is unable to accept liability for any incorrect information. This does not affect your statutory rights.
This information is supplied for personal use only, and may not be reproduced in any way without the prior consent of Tesco Stores Limited nor without due acknowledgement.
Tesco © Copyright 2025