Marketplace.
Drybase Tanking Slurry 25 KG - BBA Approved Waterproofing Cement for Walls, Basement, Pond
£59.99
£59.99/each
Collect Clubcard points on Marketplace products
Sold and sent by Safeguard Europe Ltd
Delivered by post or courier
Delivery
- FREE standard delivery between Fri 31 Oct - Mon 3 Nov
- FREE express delivery between Wed 29 Oct - Thu 30 Oct if you order before 2pm
Returns
Returns available within 30 days. Christmas gifts returnable until 31 Jan.
Highlights
- For above and below ground waterproofing
- Efflorescence-free & can be spray applied
- Tested for resistance up to 7 bar pressure
Description
Drybase Tanking Slurry is a cementitious, ready-mixed waterproofing compound formulated for use on concrete and masonry surfaces subject to water ingress. Designed for both active and passive water pressure, it provides durable and reliable waterproofing for below-ground structures, basements, retaining walls and foundations.Once mixed with clean water and applied by brush, trowel or spray, the slurry hardens to form a seamless hydrophobic barrier. It bonds strongly to both horizontal and vertical surfaces and remains vapour-permeable after curing. The hardened coating resists frost, de-icing salts and carbonation, and has been tested to withstand up to 7 bar of water pressure. Drybase Tanking Slurry complies with EN 1504-3 and is approved for use in contact with drinking water.This versatile coating is supplied as a grey powder in 25 kg bags. It is mixed with 4.5 to 6 litres of water per bag using a mechanical mixer, giving approximately 45 minutes of working time at 20°C. Two coats are recommended, with the second applied while the first remains damp. Application rates range from 3–4 kg/m² for pressureless water, and 4–6 kg/m² for pressurised conditions, depending on severity. Surface preparation is essential — substrates must be clean, sound and dampened prior to use, but free from standing water. Loose material, coatings and contamination must be removed, and cracks or joints repaired in advance.Drybase Tanking Slurry can be finished with render or coatings after a minimum cure time of four weeks. Where plastering is required, a rough cast of sand and cement should be applied to the final slurry coat at initial set, or a bonding agent may be used once the surface is fully cured. The product is suitable for interior or exterior application and can be spray-applied using specialist mortar spray equipment. During curing, surfaces should be kept moist for at least five days and protected from frost, drying winds and direct sunlight.
Sold by Safeguard Europe Ltd
| Size | 25kg |
|---|
H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation. P102 Keep out of reach of children. P261 Avoid breathing dust. P280 Wear protective gloves/protective clothing/ eye protection/face protection. P305+P351+P338+P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Delivery
- FREE standard delivery between Fri 31 Oct - Mon 3 Nov
- FREE express delivery between Wed 29 Oct - Thu 30 Oct if you order before 2pm
Returns
Not happy with a Marketplace item? You can request a return and refund online up to 30 days after the delivery date. You'll need to return the item to the Marketplace seller.Our returns policy
Christmas returns
We've extended our usual returns policy for Christmas gifts. You can return gifts purchased between 1 October and 24 December 2025 until 31 January 2026.
Manufacturer Address
Safeguard Europe Ltd., Redkiln Close, Horsham, West Sussex, RH13 5QL
Drybase Tanking Slurry 25 KG - BBA Approved Waterproofing Cement for Walls, Basement, Pond
£59.99
£59.99/each
Highlights
- For above and below ground waterproofing
- Efflorescence-free & can be spray applied
- Tested for resistance up to 7 bar pressure
Description
Drybase Tanking Slurry is a cementitious, ready-mixed waterproofing compound formulated for use on concrete and masonry surfaces subject to water ingress. Designed for both active and passive water pressure, it provides durable and reliable waterproofing for below-ground structures, basements, retaining walls and foundations.Once mixed with clean water and applied by brush, trowel or spray, the slurry hardens to form a seamless hydrophobic barrier. It bonds strongly to both horizontal and vertical surfaces and remains vapour-permeable after curing. The hardened coating resists frost, de-icing salts and carbonation, and has been tested to withstand up to 7 bar of water pressure. Drybase Tanking Slurry complies with EN 1504-3 and is approved for use in contact with drinking water.This versatile coating is supplied as a grey powder in 25 kg bags. It is mixed with 4.5 to 6 litres of water per bag using a mechanical mixer, giving approximately 45 minutes of working time at 20°C. Two coats are recommended, with the second applied while the first remains damp. Application rates range from 3–4 kg/m² for pressureless water, and 4–6 kg/m² for pressurised conditions, depending on severity. Surface preparation is essential — substrates must be clean, sound and dampened prior to use, but free from standing water. Loose material, coatings and contamination must be removed, and cracks or joints repaired in advance.Drybase Tanking Slurry can be finished with render or coatings after a minimum cure time of four weeks. Where plastering is required, a rough cast of sand and cement should be applied to the final slurry coat at initial set, or a bonding agent may be used once the surface is fully cured. The product is suitable for interior or exterior application and can be spray-applied using specialist mortar spray equipment. During curing, surfaces should be kept moist for at least five days and protected from frost, drying winds and direct sunlight.
Sold by Safeguard Europe Ltd
| Size | 25kg |
|---|
H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation. P102 Keep out of reach of children. P261 Avoid breathing dust. P280 Wear protective gloves/protective clothing/ eye protection/face protection. P305+P351+P338+P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Delivery
- FREE standard delivery between Fri 31 Oct - Mon 3 Nov
- FREE express delivery between Wed 29 Oct - Thu 30 Oct if you order before 2pm
Returns
Not happy with a Marketplace item? You can request a return and refund online up to 30 days after the delivery date. You'll need to return the item to the Marketplace seller.Our returns policy
Christmas returns
We've extended our usual returns policy for Christmas gifts. You can return gifts purchased between 1 October and 24 December 2025 until 31 January 2026.
Manufacturer Address
Safeguard Europe Ltd., Redkiln Close, Horsham, West Sussex, RH13 5QL
Explore more
About Marketplace
We're giving you more choice than ever before. Shop more products from more brands across homewares, beauty, electricals and much more.
Sold and sent by trusted sellers right to your door.
No reviews yet
Help other customers like you
Reviews are submitted by our customers directly through our website. We also share reviews from other retailers' websites to help you make an informed decision.
Write a review