Marketplace.
Drybase Liquid Damp Proof Membrane - 1L White - Damp Proofing Paint for Walls & Floors
£19.99
£19.99/each
Sold and sent by Safeguard Europe Ltd
Delivered by post or courier
Delivery
- FREE standard courier delivery by Thu 9 Oct
- FREE express courier delivery by Tue 7 Oct if you order before 2pm
Returns
Returns available within 30 days.
Highlights
- Water-based single pack damp-proof barrier
- Gas and radon barrier
- Easy to apply
Description
Drybase Liquid-Applied DPM is a single-pack, water-based damp-proof membrane that forms a flexible, seamless barrier to water and ground gases including radon, methane and carbon dioxide. Supplied ready for use, it is ideal for above-ground applications on solid floors, embedded timbers and floor-to-wall junctions. Once applied, it cures to form an elastic coating that is touch-dry in approximately one hour.This bitumen-free membrane is applied in two coats by brush, roller or airless spray. Each layer should be applied at 0.55 litres per square metre, ensuring a dry film thickness of at least 0.6 mm for compliance with CP102:1973 code of practice. Coverage is approximately 4.5 m² per 5 litres for vapour barrier applications, or up to 9 m² for general-purpose DPM use, depending on surface porosity.Drybase Liquid-Applied DPM is suitable for use beneath screeds, tiles, laminate flooring and other surface finishes. It is also recommended for sealing embedded timbers, sunken posts, wet room floors and for use as a primer before replastering to help prevent salt attack.It is not designed for use under negative water pressure or on external surfaces exposed to direct sunlight. For below-ground applications or situations involving water ingress from the negative side, an alternative waterproofing system such as Drybase Tanking Slurry should be used.Substrates must be clean, structurally sound and free from grease, coatings or loose material. Weak or friable surfaces should be stabilised or primed with Drybase Bondaid Plus. Always allow the first coat to dry before applying the second coat at right angles. Where screeds or levelling compounds are required, these should be laid while the second coat remains tacky, or applied to a keyed surface if cured.
Sold by Safeguard Europe Ltd
| Size | 1 Litre |
|---|
May produce an allergic reaction. Safety data sheet available on request. — Keep out of reach of children and animals. Unprotected persons and animals should be kept away from treated surfaces until dry. Use in a well ventilated area.
Delivery
- FREE standard courier delivery by Thu 9 Oct
- FREE express courier delivery by Tue 7 Oct if you order before 2pm
Returns
Not happy with a Marketplace item? You can request a return and refund online up to 30 days after the delivery date. You'll need to return the item to the Marketplace seller.Our returns policy
Manufacturer Address
Safeguard Europe Ltd., Redkiln Close, Horsham, West Sussex, RH13 5QL
Drybase Liquid Damp Proof Membrane - 1L White - Damp Proofing Paint for Walls & Floors
£19.99
£19.99/each
Highlights
- Water-based single pack damp-proof barrier
- Gas and radon barrier
- Easy to apply
Description
Drybase Liquid-Applied DPM is a single-pack, water-based damp-proof membrane that forms a flexible, seamless barrier to water and ground gases including radon, methane and carbon dioxide. Supplied ready for use, it is ideal for above-ground applications on solid floors, embedded timbers and floor-to-wall junctions. Once applied, it cures to form an elastic coating that is touch-dry in approximately one hour.This bitumen-free membrane is applied in two coats by brush, roller or airless spray. Each layer should be applied at 0.55 litres per square metre, ensuring a dry film thickness of at least 0.6 mm for compliance with CP102:1973 code of practice. Coverage is approximately 4.5 m² per 5 litres for vapour barrier applications, or up to 9 m² for general-purpose DPM use, depending on surface porosity.Drybase Liquid-Applied DPM is suitable for use beneath screeds, tiles, laminate flooring and other surface finishes. It is also recommended for sealing embedded timbers, sunken posts, wet room floors and for use as a primer before replastering to help prevent salt attack.It is not designed for use under negative water pressure or on external surfaces exposed to direct sunlight. For below-ground applications or situations involving water ingress from the negative side, an alternative waterproofing system such as Drybase Tanking Slurry should be used.Substrates must be clean, structurally sound and free from grease, coatings or loose material. Weak or friable surfaces should be stabilised or primed with Drybase Bondaid Plus. Always allow the first coat to dry before applying the second coat at right angles. Where screeds or levelling compounds are required, these should be laid while the second coat remains tacky, or applied to a keyed surface if cured.
Sold by Safeguard Europe Ltd
| Size | 1 Litre |
|---|
May produce an allergic reaction. Safety data sheet available on request. — Keep out of reach of children and animals. Unprotected persons and animals should be kept away from treated surfaces until dry. Use in a well ventilated area.
Delivery
- FREE standard courier delivery by Thu 9 Oct
- FREE express courier delivery by Tue 7 Oct if you order before 2pm
Returns
Not happy with a Marketplace item? You can request a return and refund online up to 30 days after the delivery date. You'll need to return the item to the Marketplace seller.Our returns policy
Manufacturer Address
Safeguard Europe Ltd., Redkiln Close, Horsham, West Sussex, RH13 5QL
Explore more
About Marketplace
We're giving you more choice than ever before. Shop more products from more brands across homewares, beauty, electricals and much more.
Sold and sent by trusted sellers right to your door.
No reviews yet
Help other customers like you
Reviews are submitted by our customers directly through our website. We also share reviews from other retailers' websites to help you make an informed decision.
Write a review