Marketplace.
JBL ProFlora CO2 pH Sensor Set
£59.99
£59.99/each
Collect Clubcard points on Marketplace products
Sold and sent by Aquacadabra
Delivered by post or courier
Delivery
- FREE standard delivery between Mon 10 Nov - Fri 14 Nov
- £5.95 express delivery between Thu 6 Nov - Fri 7 Nov if you order before 2pm
Returns
Returns available within 30 days. Christmas gifts returnable until 31 Jan.
Description
Healthy fish thanks to an ideal pH value
The acidity defines the pH value of the water. It needs to be constantly checked and adjusted as necessary to maintain the health of the fish and plants. The correct pH value depends on the fish stock of the aquarium. The wrong pH value can cause stress and disease.
Easy to connect
Connect the pH electrode with the BNC connection to its corresponding measuring and control device. - RELIABLE: The electrode has been individually tested and documented and needs to be replaced after about 2 years. It comes with a large protective cap, filled with storage solution.
pH electrodes:
Every pH control or measuring device and also the JBL pH-CO2 control unit (JBL PROFLORA pH-CONTROL) requires a pH electrode (JBL PROFLORA CO2 SENSOR) to measure the pH value of the water. pH electrodes age with time and must be replaced about every 2 years. Every 30-45 days the pH electrode needs to be calibrated so that it continues to show accurate values. During calibration, the functionality of the electrode is also checked so that you know when a new electrode is needed. The pH electrodes do not like the addition of medication in the water and should be placed in a glass of aquarium water during treatments. pH electrodes should not be stored in distilled water but in a potassium chloride solution (KCl, a JBL storage solution).
Positioning the pH electrode in the aquarium: attach the pH electrode with the enclosed suction cups to an ideally dark area in the aquarium with little current. Electrodes easily become algae-ridden in very bright locations.
Robust quality electrode for the JBL CO2 Control unit and other pH measuring and control devices with BNC connection, incl. liquid for calibration and storage of pH sensors Simple connection: connect the electrode via BNC connector to the respective measuring or control device (not supplied) Large protective cap filled with storage solution, plastic shaft and gel filling, suitable for many systems with BNC connector Individually tested with an individual test report Package contents: pH electrode, 2 m cable, 2 suction holders for attachment, 3 cuvettes, 50 ml cylinders: storage solution, distilled water, calibration liquids pH 7.0 and 4.0
The acidity defines the pH value of the water. It needs to be constantly checked and adjusted as necessary to maintain the health of the fish and plants. The correct pH value depends on the fish stock of the aquarium. The wrong pH value can cause stress and disease.
Easy to connect
Connect the pH electrode with the BNC connection to its corresponding measuring and control device. - RELIABLE: The electrode has been individually tested and documented and needs to be replaced after about 2 years. It comes with a large protective cap, filled with storage solution.
pH electrodes:
Every pH control or measuring device and also the JBL pH-CO2 control unit (JBL PROFLORA pH-CONTROL) requires a pH electrode (JBL PROFLORA CO2 SENSOR) to measure the pH value of the water. pH electrodes age with time and must be replaced about every 2 years. Every 30-45 days the pH electrode needs to be calibrated so that it continues to show accurate values. During calibration, the functionality of the electrode is also checked so that you know when a new electrode is needed. The pH electrodes do not like the addition of medication in the water and should be placed in a glass of aquarium water during treatments. pH electrodes should not be stored in distilled water but in a potassium chloride solution (KCl, a JBL storage solution).
Positioning the pH electrode in the aquarium: attach the pH electrode with the enclosed suction cups to an ideally dark area in the aquarium with little current. Electrodes easily become algae-ridden in very bright locations.
Key Features:
Sold by Aquacadabra (pd aquatics ltd)
Delivery
- FREE standard delivery between Mon 10 Nov - Fri 14 Nov
- £5.95 express delivery between Thu 6 Nov - Fri 7 Nov if you order before 2pm
Returns
Not happy with a Marketplace item? You can request a return and refund online up to 30 days after the delivery date. You'll need to return the item to the Marketplace seller.Our returns policy
Christmas returns
We've extended our usual returns policy for Christmas gifts. You can return gifts purchased between 1 October and 24 December 2025 until 31 January 2026.
JBL ProFlora CO2 pH Sensor Set
£59.99
£59.99/each
Description
Healthy fish thanks to an ideal pH value
The acidity defines the pH value of the water. It needs to be constantly checked and adjusted as necessary to maintain the health of the fish and plants. The correct pH value depends on the fish stock of the aquarium. The wrong pH value can cause stress and disease.
Easy to connect
Connect the pH electrode with the BNC connection to its corresponding measuring and control device. - RELIABLE: The electrode has been individually tested and documented and needs to be replaced after about 2 years. It comes with a large protective cap, filled with storage solution.
pH electrodes:
Every pH control or measuring device and also the JBL pH-CO2 control unit (JBL PROFLORA pH-CONTROL) requires a pH electrode (JBL PROFLORA CO2 SENSOR) to measure the pH value of the water. pH electrodes age with time and must be replaced about every 2 years. Every 30-45 days the pH electrode needs to be calibrated so that it continues to show accurate values. During calibration, the functionality of the electrode is also checked so that you know when a new electrode is needed. The pH electrodes do not like the addition of medication in the water and should be placed in a glass of aquarium water during treatments. pH electrodes should not be stored in distilled water but in a potassium chloride solution (KCl, a JBL storage solution).
Positioning the pH electrode in the aquarium: attach the pH electrode with the enclosed suction cups to an ideally dark area in the aquarium with little current. Electrodes easily become algae-ridden in very bright locations.
Robust quality electrode for the JBL CO2 Control unit and other pH measuring and control devices with BNC connection, incl. liquid for calibration and storage of pH sensors Simple connection: connect the electrode via BNC connector to the respective measuring or control device (not supplied) Large protective cap filled with storage solution, plastic shaft and gel filling, suitable for many systems with BNC connector Individually tested with an individual test report Package contents: pH electrode, 2 m cable, 2 suction holders for attachment, 3 cuvettes, 50 ml cylinders: storage solution, distilled water, calibration liquids pH 7.0 and 4.0
The acidity defines the pH value of the water. It needs to be constantly checked and adjusted as necessary to maintain the health of the fish and plants. The correct pH value depends on the fish stock of the aquarium. The wrong pH value can cause stress and disease.
Easy to connect
Connect the pH electrode with the BNC connection to its corresponding measuring and control device. - RELIABLE: The electrode has been individually tested and documented and needs to be replaced after about 2 years. It comes with a large protective cap, filled with storage solution.
pH electrodes:
Every pH control or measuring device and also the JBL pH-CO2 control unit (JBL PROFLORA pH-CONTROL) requires a pH electrode (JBL PROFLORA CO2 SENSOR) to measure the pH value of the water. pH electrodes age with time and must be replaced about every 2 years. Every 30-45 days the pH electrode needs to be calibrated so that it continues to show accurate values. During calibration, the functionality of the electrode is also checked so that you know when a new electrode is needed. The pH electrodes do not like the addition of medication in the water and should be placed in a glass of aquarium water during treatments. pH electrodes should not be stored in distilled water but in a potassium chloride solution (KCl, a JBL storage solution).
Positioning the pH electrode in the aquarium: attach the pH electrode with the enclosed suction cups to an ideally dark area in the aquarium with little current. Electrodes easily become algae-ridden in very bright locations.
Key Features:
Sold by Aquacadabra (pd aquatics ltd)
Delivery
- FREE standard delivery between Mon 10 Nov - Fri 14 Nov
- £5.95 express delivery between Thu 6 Nov - Fri 7 Nov if you order before 2pm
Returns
Not happy with a Marketplace item? You can request a return and refund online up to 30 days after the delivery date. You'll need to return the item to the Marketplace seller.Our returns policy
Christmas returns
We've extended our usual returns policy for Christmas gifts. You can return gifts purchased between 1 October and 24 December 2025 until 31 January 2026.
Explore more
About Marketplace
We're giving you more choice than ever before. Shop more products from more brands across homewares, beauty, electricals and much more.
Sold and sent by trusted sellers right to your door.
No reviews yet
Help other customers like you
Reviews are submitted by our customers directly through our website. We also share reviews from other retailers' websites to help you make an informed decision.
Write a review