Description
FrogTape® is the only painter's masking tape treated with PaintBlock® Technology. It reacts with emulsion paint and instantly gels to form a micro-barrier that seals the edges of the tape, preventing paint bleed. The result: Very sharp line.
Without Paint Block®**** Comparison shown between FrogTape® painters tape and CP 27® premium grade painting tape marketed by Shurtape Technologies. Results may vary.FSC - FSC® Mix, Paper / Supporting responsible forestry, FSC® C154304©Shurtape UK Ltd 2022
Keeps paint outKeeps lines sharpThe only tape treated with paint block technology seals tape edges!Over 40m
Preparation and Usage
ApplyDo not stretch the tape. Secure it with a flat tool or roller.PaintFrogTape® is designed to work with emulsion paint.RemoveFor best results, remove immediately after painting. Do not wait for the paint to dry completely.Practical Advice:- Freshly painted surfaces*- For use on freshly painted surfaces (*dried for at least 24 hours), most coated wallpapers/treated wood/new plastered walls (dried and sealed)/veneer/laminate/vinyl and to create paint effects. Can be repositioned easily. Always test on an inconspicuous area first.- Before painting, FrogTape® can be applied up to 60 days. It is UV resistant and can be applied in direct sunlight.- Remove immediately. If pain has dried, score the edges of the tape with a blade before removing. Remove slowly, folding the tape almost all the way onto itself.- If the tape begins to lift or pull off the surface, it probably means that you have masked a poorly bonded surface; try using a hairdryer to soften the tape's adhesive.- Protect the edge of your FrogTape® by storing the unused portion in this canister.Important:- Even low adhesion tapes can damage some very delicate surfaces, so for complete compatibility test before use on all surfaces.- Coated wallpaper†- †Wallpaper finishes can vary, we would not recommend FrogTape® for use with uncoated wallpapers.- Use only on clean dry surfaces.- Allow paint to fully dry (not just touch dry) for at least 24 hours before applying FrogTape® as humidity, paint colour and number of coats may affect curing time.
